How to Put in a Try it for yourself Bedliner in 5 Steps

My sons and I just installed a try it for yourself bedliner on our 1980 pick-up. It’s hard to think how much better it looks. We found several tricks even as completed the project. Here are 5 steps to the truck bedline project and tips to practice it right.

Action 1 — Pick the right truck bed paint…

Truck bed paint is special. It’s a polyurethane paint, but it includes plastic pieces to give it texture. The top brands are Herculiner, Plasti-Kote and Duplicolor. You’ll need about 5 quarts for a full size truck. Get plenty of paint, since a good thick coat is what you want.

Step two — Clean first…

A good clean surface is the first step to success. Washing the bed is important, but it’s not enough. That’s because you must remove any old feel or fat. That’s easy. Just get a regularly auto fat and feel remover from your auto parts store.

3 — Rough is good…

Paint branches far better a surface that has been roughed up or sanded. Don’t spare the abrasives. Use rough sandpaper or other abrasives to essentially scratch in the surface to be sprayed. What a trick to a paint coat that really branches and lasts.

Step four — Mask or else…

Truck bed paint is really sticky. Get it where you don’t are interested and you’ve got trouble. So mask carefully for a neat job.

Step 5 — Running is easy…

Bed ship paint can be covered, thrown or sprayed on. This paint is so heavy and thick, you can’t tell a thrown on coating was not sprayed on. A roller puts on a beautiful coating. Here’s the thing. Do the preparation properly. Get the surface cleaned and sanded right. Then applying the finale couldn’t be easier. There’s nothing to applying the coating.

Save a heap of money and make your truck look much better with a try it for yourself bedliner. You can do. Just make sure , nor skip the cleaning and sanding. This is a great way to increase the looks of an older truck.

Leave a Reply

Your email address will not be published. Required fields are marked *